Application and Features :
※ Applied to fabricate PE PP PVDF elbow, tee, cross and Y shape (45° and 60°)
※ Fitting in workshop. Also used to lengthen the injection moulded fitting and make an integrated fitting.
※ Integrated structure. Nothing remains but to choose the different special clamps while fabricating different fitting
※ Removing PTEF coated heating plate with separate temperature controlling system.
※ Electric planning tool with safety limit switch enable to start it only when it is locked in the operation position.
※ Low starting pressure and high reliable seal structure.
※ Separate two-channel timer record times in soaking and cooling phase.
※ Digital pressure meter enable to control pressure accurately.
※ Linear guide ways are equipped with eating plate, planning tool and dragging plate.
※ Products comply with 98/37/EC and 73/23/EEC standards.
Optional parts:
※ Special clamps for welding flange stub
※ Special clamps for fitting
※ Special clamps welding Y shape (45° and 60°) fittings
Parameters:
Model
|
SKC-MA800
|
Pipe sizes(mm)
|
450,500,560,630,710,800
|
Working ranges Elbow
|
0~90° tee, cross
|
Heating Plate Max. Temp
|
270℃
|
Temp. deviation in surface(170°-250°)
|
±7℃
|
Pressure adjustable ranges
|
0~16MPa
|
Working Voltage
|
380V 50Hz
|
Heating Plate power
|
39Kw
|
Planning tool power
|
4Kw
|
Hydraulic unit power
|
4Kw
|
Total power
|
47Kw
|
Total weight
|
4900KG(Exclude optional parts)
|